Filter
Top Products
14 – English
MAINTENANCE
´®z+R=@¶6r¨
´®z+R=@¶6r¨
Daily maintenance
Carry out the following checks daily before using the machine.
1 Check that nuts and screws are tight.
2 Check that the power source (the hydraulic unit) supplies
the correct oil flow and oil pressure.
3 Check that the hydraulic hoses and couplings are clean
and undamaged.
4 Connect the machine hoses with the hoses from the
power source.
5 Start the power source and check that the power cutter
functions by starting the machine with the switch in the
rear handle. Check that the blade stops when the switch
is released.
6 Checking the blade guard
7 Check the condition of the cutting blade.
8 Check the tension of the drive belt.