Filter
Top Products
English – 15
TECHNICAL DATA
Technical data
Note 1: Handle vibrations are measured according to ISO 8662-4
Cutting equipment
EC-declaration of conformity
(Applies to Europe only)
Husqvarna Construction Products, SE-433 81 Partille, Sweden, tel: +46-31-949000, declares under sole responsibility that the
power cutter K2500 from year 2006 serial numbers and onward (the year is clearly stated in plain text on the rating plate with
subsequent serial number) conforms with the requirements of the COUNCIL’S DIRECTIVE:
- of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
The following standards have been applied: EN ISO 12100:2003, EN 982:1996, EN 792-7:2001
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type examination on
behalf of Husqvarna AB. The certificates are numbered:
01/169/009 – K2500.
Partille November 14, 2006
Ove Donnerdal, Development Manager
Technical data K2500
Engine
Hydraulic oil flow, l/min / gpm 35-42 / 9-11
Working pressure, bar / psi 130-140 / 2000
Max. working pressure, bar / psi 150 / 2200
Max. speed of output shaft, rpm 4300
Drive system, V-belt SPZ
Weight
Power cutter without cutting blade, kg 8,3
Sound levels
Noise pressure level at the operators ear, max. speed,
measured according to ISO/DIS 15744, ISO/DIS 11201,
dB (A) 85
Noise emissions
Sound power level, measured dB(A) 106
Sound power level, guaranteed L
WA
dB(A) 107
Vibration levels
(see note 1)
Front handle, m/s
2
7,5
Rear handle, m/s
2
5,2
Cutting blade Max. peripheral speed, m/s
16" 100