Filter
Top Products
26 – English
MAINTENANCE
Air filter
The air filter only needs to be checked if the engine drops in
power.
• Loosen the screws. Remove the air filter cover.
• Check the air filter and replace if necessary.
Replacing the air filter
• Loosen the screws. Remove the cover.
• Replace the air filter.
Drive gear, clutch
• Check the clutch centre, drive gear and clutch spring for
wear.
Reconstructing the blade
NOTICE! The air filter must not be cleaned or blown clean
with compressed air. This will damage the filter.
!
WARNING! Ring cutter blades must not be
reconstructed. Due to its design, a ring
cutter blade is exposed to other strains than
a centre driven 14 inch diamond blade.
Firstly, the drive wheel is driven on the inner
diameter of the blade so that both the
surfaces of the drive wheel and the blade are
exposed to wear. The core of the blade
becomes thinner and the guide wider, which
prevents the blade being driven by the
wheel. Secondly, the blade is exposed to
loads from the rollers and from the actual
cutting process when the blade is not held
completely straight. Strain builds up in the
blade until it cracks or breaks if it has been
reconstructed. A shattered blade can cause
serious personal injuries to the user or other
persons. For this reason Husqvarna does
not approve ring cutting blades that have
been reconstructed. Contact your
Husqvarna dealer for instructions.