Filter
Top Products
18 – English
MAINTENANCE
Maintenance schedule
CAUTION! The chart is based on daily use of the equipment.
Blades conforming to EN13236
Husqvarna K3600 MKII only conforms to 98/37/EC and EN13236 together with the blades listed below:
Note: The blades are available in different hardnesses for different materials, this is stated with two digits, XX.
Daily Twice a week
Support and guide rollers
Check the support rollers with regard to wear. X
Check the guide rollers with regard to wear. X
Lubricate the guide rollers. X
Hydraulic System
Inspect the hydraulic hoses. X
Inspect and clean the water nozzle. X
Drive system
Check the condition of the drive wheel. X
Water system
Inspect and clean the water nozzles on the water disc. X
Inspect the water adjustment control. X
Check the filter in the water coupling. X
Controls
Check that the controls work. X
Blade
Check the condition of the blade guard. X
Check the water disc. X
Type Diameter, mm
Husqvarna
PXR XX 350
ELR XX (5,6 / ,220) 350
SLR XX 350
R550-0355 (5,6 mm) 350
R530-0355 350
R510-0355 (5,6 mm) 350