Filter
Top Products
20 – English
TECHNICAL DATA
*We recommend the use of environmentally approved hydraulic oil.
**With high ambient temperatures use oil with a higher viscosity.
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Noise pressure level according to EN 792-7/A1. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.0 dB(A).
Note 3: Vibration level according to EN 792-7/A1. Reported data for vibration level has a typical statistical dispersion (standard
deviation) of 1 m/s
2
.
Extending the hydraulic hoses
When extending the hydraulic hoses, the inside diameter of the hose must be increased according to the table to counteract power
loss.
Technical data K3600 MKII
Blade diameter, mm/inches 350/14”
Cutting depth, mm/inches 260/10”
Max. peripheral speed, m/s / r/min 55/3000
Max.motor speed, r/min 17000
Hydraulic motor Geared motor (open centre valve)
Max. hydraulic pressure, bar/ (psi) 150 / 2200
Oil flow, min-max, l/min 35-42
Height, mm/inches 410
Length, mm/inches 715
Width, mm/inches 260
Weight, excl. blade, kg 8,3
Weight ring blade, kg 0,8
Specifications hydraulic oil* 150 VG 32 (10W)**
Oil temperature (operational), °C 60
Water consumption, l/min 4
Hydraulic couplings 1/2' FF according to HTMA regulations. (thread 3/8')
Noise emissions (see note 1)
Sound power level, measured dB(A) 110
Sound power level, guaranteed L
WA
dB(A) 111
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A) 99
Vibration levels (see note 3)
Front handle, m/s
2
4,3
Rear handle, m/s
2
6,0
Extension, m Inside diameter of the hydraulic hose, inches
Up to 30 m 1/2
30-45 5/8
45-100 3/4