Filter
Top Products
46805370_ed1 EN-1
EN
Product Safety Information
Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Impact Wrenches Product Safety Information
Manual Form 04580916.
Manuals can be downloaded from www.ingersollrandproducts.com.
Power Management System
For models that include a power management system, the system allows operator reduction of
maximum output power in either the forward or the reverse direction.
For reduced power in the forward direction and full power in the reverse direction, push
the reverse valve inward on the right side of the tool and rotate the reverse valve until the notch
on the right side aligns with the desired number on the right side. This provides reduced power
in forward but full power in reverse when the reverse valve is pushed in the opposite direction.
(See TPD1248 on page 2.) For reduced power in the reverse direction and full power in the
forward direction, push the reverse valve inward on the left side of the tool and rotate the
reverse valve until the notch on the left side aligns with the desired number on the left side. This
provides full power in forward but reduced power in reverse when the reverse valve is pushed
the opposite direction. (See TPD1249 on page 2.) For full power in both directions, rotate the
Reverse Valve until the notch on each end of the Reverse Valve aligns with 5 on each side of the
housing.
The power level indicators (See TPD1248 and TPD1249) are for reference and DO NOT indicate
a specic power. The power output can be further reduced in forward or reverse by using the
variable throttle.
Product Specications
Model
Drive
Size
Recommended
Torque Range
Max.
Torque
(Reverse)
Maximum
Free Speed
Blows
Per
Minute
Tool
Weight
Overall
Length
Average Air
Consumption
ft-lbs Nm ft-lb Nm rpm BPM lbs Kg in mm cfm l/min
215G 3/8” 20-125 27-170 160 217 11300 1500 3.0 1.4 5.9 151 3 85
Model
Air
Consumption
@ Load
Impacting
Sound Level dB (A)
(ISO15744)
Free Speed
Sound Level dB (A)
(ISO15744)
Vibration
(ISO28927)
m/s²
cfm l/min † Pressure (L
p
) ‡ Power (L
w
) † Pressure (L
p
) ‡ Power (L
w
) Level * K
215G 16 453 92.3 103.3 97.0 108.0 6.4 1.0
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
* K = Vibration measurement uncertanity