Filter
Top Products
45664752_ed1 EN-1
EN
Product Safety Information
Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Impact Wrenches Product Safety Information
Manual Form 04580916.
Manuals can be downloaded from www.ingersollrandproducts.com.
Power Management System
To adjust the power, rotate the Power Regulator to the desired level indicator.
The power level indicators are for reference and DO NOT indicate a specic power. The power
output can be further reduced in forward or reverse by using the variable throttle.
Product Specications
Model Style
Drive
Impacts
per
min.
Recommended Torque Range
Type Size
Forward
ft-lb (Nm)
Reverse
ft-lb (Nm)
259G Pistol Square 3/4” 1000
200-800 [1050 Max.]
(272-1085 [1424 Max.])
200-800 [1050 Max.]
(272-1085 [1424 Max.])
Model
Impacting
Sound Level dB (A)
(ISO15744)
Free Speed
Sound Level dB (A)
(ISO15744)
Vibration (m/s²)
(ISO28927)
† Pressure (L
p
) ‡ Power (L
w
) † Pressure ‡ Power Level *K
259G 91.6 102.6 96.5 107.5 6.4 0.8
† K
pA
= 3dB measurement uncertanity
‡ K
wA
= 3dB measurement uncertanity
* K = Vibration measurement uncertanity
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-o, to prevent hose whipping if a hose fails or coupling disconnects.
See drawing
16619702
and table on page 2. Maintenance frequency is shown in a circular arrow
and dened as h=hours, d=days, and m=months of actual use. Items identied as:
1. Air lter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-o valve 9. Oil
5. Hose diameter 10. Grease
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.