Filter
Top Products
ACCESSORIES
44361-(
) PIPED EXHAUST SYSTEM ASSEMBLY
M30
33
30302-( ) INLET HOSE - 5/16” I.D.
1/4” P.T.F. THREAD
P.T.F. THREAD
TO AIR SUPPLY
46672-l ADAPTER ASSEMBLY
2622 HOSE ADAPTER
3/8” MALE N.P.T.F.
1/2” I.D.
43551-6 MUFFLER
3/8” FEMALE N.RT.F.
PIPED EXHAUST ASSEMBLY CONSISTS OF 5/16” I.D. AIR INLET HOSE WlTH IN” MALE FlTTlNG AT EACH END, 1/2”
I.D. EXHAUST HOSE, 45672-l ADAPTER ASSEMBLY AND 2622 BARBED INSERT WlTH 3/8” MALE THREAD.
TO ORDER PIPED EXHAUSTSYSTEM ASSEMBLY: ADD DASH NUMBER TO PART NUMBER TO INDICATE DESIRED
LENGTH OF HOSE IN FEET. EXAMPLE: 44361-20, THE -20 INDICATES 20 FEET OF HOSE. ORDER LENGTH DE-
SIRED UP TO 30 FEET MAXIMUM.
TO ASSEMBLE ADAPTER TO TOOL: REMOVE RETAINING RING (Y147-68), 2 SCREENS (42611) AND MUFFLER (45474) FROM TOOL. INSERT ADAPTER
(46572-l) INTO HOUSING UNTIL lT BOTTOMS IN HOUSING AND SECURE WITH RETAINING RING (Y147-68). THREAD INLET HOSE TO TOOL AND TlGHTEN
SO EXHAUST HOSE ALIGNS WlTH ADAPTER (45572) AND SUP EXHAUST HOSE OVER ADAPTER. NO CLAMP IS NEEDED TO SECURE HOSE TO ADAPTER
SINCE EXHAUST PRESSURE IS VERY LOW.
CAN BE USED ON THE “QRT” SCREWDRIVER AS AN IN-LlNE REG-
ULATOR. HAS 1/4” MALE N.P.T.F. AND 1/4” FEMALE N.P.T.F. INLET FOR
AIR HOSE.
37526 AIR REGULATOR
13