Filter
Top Products
10
WARNING
DO NOT run unit without filter.
Avoid operating this product in a dusty environment
which could cause premature compressor wear.
SETUP
1. Place the device on a table so that the controls can be reached
when seated.
2. Secure one end of the nebulizer tubing to the compressor air
outlet (FIGURE 1).
3. Connect the other end to the nebulizer.
WARNING
In the case of high humidity, condensation may form
inside the internal tubing. Run the unit for two (2) minutes
before connecting the nebulizer to the tubing.
OPERATION
FIGURE 1 - LOCATION OF COMPRESSOR AIR OUTLET
Rear Power Switch
Compressor Air Outlet
for connecting Nebulizer
Air Tubing