Filter
Top Products
iOptronCorp.|6FGillStreet|Woburn,MA01801USA|(781)935‐2800|TollFree(866)399‐4587|www.iOpt ron.com
QuickSet‐up
Note:Thisisabriefoutlineforgettingstarted.Pleaserefertothefullmanualatwww.iOptron.comfor
details.
Step 1.
Extend tripod legs to full extension.
Step 2.
Attach mount to tripod using the long bolt (#7). Slide
tray on bottom of shaft. Then screw on round black
knob (#9).
Step 3.
Attach telescope to mount using dovetail lock (#2).
Step 4.
Set telescope to PARK POSITION. (1) Position the
mount so that the “S” is facing south. (2) The telescope
tube should be pointed directly up at the zenith. If it is
not perfectly straight then loosen the altitude lock (#4)
to adjust telescope.
Step 5.
Level the mount using the bubble on side of mount by
adjusting tripod legs. It is also suggested to use
additional levels to assure very precise level.
1)South
2)Up