Filter
Top Products
7
Unpacking
The table below lists the shipping cartons that are
included with the various models of the DC-1200
Dust Collector.
1. Locate your particular model and verify that you
have received the all the correct cartons.
2. Check contents of each carton against the ship-
ping content listings on this and the following
page.
3. Report any damage to your distributor.
4. Do not discard any shipping material until after
the dust collector has been assembled and is
running properly.
Base Unit (SN 710700)
Base Unit (SN 710720)
Filter Bag Kit (SN 708636F)
Canister Filter Kit (SN 708639B
DC-1200BK x x
DC-1200CK x x
DC-1200-3BK x x
DC-1200-3CK x x
Table – DC-1200 Dust Collector cartons
Hardware Bag for Base Unit
(SN DC1100-HP)
16 – M8 x 16 Hex Cap Screws (K)
22 – M8 Flat Washers (L)
08 – M6 x 12 Pan Head Flange Screws (M)
06 – M8 Hex Nuts (N)
Assembly Hardware
Shipping Content
Base Unit
s
(SN 710700 and 710720)
1 – Housing (A)
2 – Hose Clamps (B)
1 – Hose (C)
1 – Impeller (Motor/Fan Assembly) (D)
1 – Inlet Port (E)
1 – Impeller Cover (F)
3 – Support Legs (G)
1 – Base (H)
4 – Casters (J)
1 – Owner's Manual (not shown)
1 – Warranty Card
1 – Hardware Bag (SN DC1200-HP)
Base Machine Shipping Contents