Filter
Top Products
8
Contents of the Shipping Carton
JDS-12B Benchtop Sander
1. Sander
1. Sanding Disc
1. Table
1. Miter Gauge
1. Inlet
1. Inlet Gasket
1. Owner's Manual
1. Warranty Card
Hardware Kit
4. Hex Head Bolt M10x40
8. Flat Washer M10
4. Lock Washers M10
4. Hex Nut M10
4. Hex Head Bolt M6x16
1. Center Point
1. Right Angle Hex Wrench 3mm
1. Filler Bar
1. Socket Head Cap Screw M5x8
OS-12DS Stand (optional accessory)
4. Stand Legs
4. Stand Supports
Hardware Kit
16. Carriage Bolt M8x16
16. Hex Nut M8
CF-12DS Canister Filter (optional accessory)
1. Canister Filter
1. Plastic Elbow
1. Grounding Wire
Tools Required for Assembly &
Adjustments
1. 13mm Wrench or socket
1. Combination Square
WARNING
Read and understand the entire contents of
this manual before attempting assembly or
operation of the disc sander!
Failure to comply may cause serious injury!
Unpacking
1. Remove all contents from the shipping
carton(s).
2. Report any damage to your distributor.
3. Do not discard any shipping material until
the sander has been assembled and is
running properly.
(708432K shown with optional stand 708438 and
Canister Filter 708434)