Filter
Top Products
5
24. Maintain a balanced stance at all times so that
you do not fall into the blade or other moving
parts. Do not overreach or use excessive force
to perform any machine operation.
25. Use the right tool at the correct speed and
feed rate. Do not force a tool or attachment to
do a job for which it was not designed. The
right tool will do the job better and more safely.
26. Use recommended accessories; improper
accessories may be hazardous.
27. Maintain tools with care. Keep saw blades
sharp and clean for the best and safest
performance. Follow instructions for lubricating
and changing accessories.
28. Turn off the machine before cleaning. Use a
brush or compressed air to remove chips or
debris — do not use your hands.
29. Do not stand on the machine. Serious injury
could occur if the machine tips over.
30. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until it comes to a complete stop.
31. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
32. Keep hands out of the line of saw blade.
33. Use a push-stick when required.
34. Pay particular attention to instructions on
reducing risk of kickback.
35. Do not perform any operation freehand.
36. Never reach around or over saw blade.
37. Don’t use in dangerous environment. Don’t
use power tools in damp or wet location, or
expose them to rain. Keep work area well
lighted.
4.0 About this manual
This manual is provided by Walter Meier (Manufacturing) Inc. covering the assembly and adjustment
procedures for a JET XACTA
®
Fence system for the JTAS-12-DX Table Saw. This manual contains instructions
on installation, safety precautions, and parts breakdown. Your fence has been designed and constructed to
provide years of trouble-free operation if used in accordance with the instructions as set forth in this document.
If there are questions or comments, please contact your local supplier or Walter Meier. Walter Meier can also
be reached at our web site: www.waltermeier.com.
Retain this manual for future reference. If the fence transfers ownership, the manual should accompany it.
Read and understand the entire contents of the table saw manual before attempting
operation of the rip fence. Failure to comply may cause serious injury.