Filter
Top Products
Toolbox Installation Instructions 9
Installation
INSTALLATION INSTRUCTIONS (CONTINUED):
5. Secure the toolbox (A) to the vehicle truck bed using the 3/8"
J-bolts (B), 3/8" flatwasher (C), 3/8" lockwashers (D) , and the
3/8" hex nuts (E). Tighten into place using a 9/16" wrench /
socket. (Fig. 7)
6. Now place the vinyl cap (F) onto the exposed threads of the
3/8" J-bolts (B). (Fig. 8)
NOTE: After drilling, it is recommended that a sealant or rust
inhibitor be placed around all holes drilled into the body
panel of the vehicle.
(Fig.7)
(Fig. 8)
A
Vehicle Bed
B
B
C
D
E
F
C
D
E
F
B
C
D
E
F