Filter
Top Products
FUNCTIONAL DESCRIPTION
CONTROLS AND COMPONENTS:
1. Grinder
2. Eye Shield (2)
3. Eye Shield Knob(2)
4. Left Side Eye Shield Bracket
5. Right Side Eye Shield Bracket
6. Left Side Tool Rest
7. Right Side Tool Rest with V-groove
8. Flexible Work Lights (2)
9. On/Off Switch
10. 15 Watts, 120V Lamp (2, not included)
10
TURN THE ON/OFF SWITCH ON THE GRINDER TO THE “OFF” POSITION AND
UNPLUG THE POWER CORD FROM THE ELECTRICAL RECEPTACLE when the
grinding operations are finished. Thoroughly clean the area surrounding the
bench grinder making it ready for the next use.
SECURE THE ELECTRICAL POWER CORD to prevent unauthorized use of the
bench grinder and/or to prevent children from accidentally turning it on.
ADDITIONAL INFORMATION about the proper use of bench grinders is available
from the Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-
2851 (www.powertoolinstitute.com). Information is also available from the
National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201.
Additionally, you can refer to the American National Standards Institute (ANSI)
01.1 Safety Requirements for Woodworking Machines and the U.S. Department
of Labor OSHA 1910.213 Regulations.
SYMBOLS
IMPORTANT: Some of the following symbols may be used on your tool. Please
study them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and safer.
SYMBOL NAME EXPLANATION
V Volts Voltage (Potential)
A Amperes Current
Hz Hertz Frequency (Cycles per Second)
W Watt Power
Kg Kilograms Weight
Alternating Current Type of Current
Direct Current Type of Current
Alternating or Direct Current Type of Current
Earthing Terminal Grounding Terminal
Class II Construction Denotes Double Insulation
min Minutes Time
s Seconds Time
Diameter Size of Drill Bits,
Grinding Wheels, etc.
No load speed No-load Rotational Speed
.../min Revolutions per Minute Revolutions, Surface Speed,
Strokes, etc. per Minute
1,2,3, … Ring Selector Settings Speed, Torque or Position Settings
O
F
F
5
3
2
10
8
6
9
7
3
2
10
4
1