Filter
Top Products
ATTACHING AUXILIARY HANDLE
This tool comes with an auxiliary
handle which can be attached to
different sides of the Angle Grinder,
depending on the preference of the
operator. This handle is necessary to
maintain complete control of the
tool and should be used at all times.
Make sure this handle is always
fastened securely.
ATTACHING WHEEL GUARD
Never brush or grind without the guard in place. Brushes
are considered to be grinding wheels and must also be used with guards.
• Always unplug the tool before attempt-
ing to change the guard or accessories.
• Set the Angle Grinder on a flat surface
with the spindle facing up.
• Place the spring washer of the guard
over the spindle.
• Tighten the screw of the spring washer.
• Make sure that the guard is securely
tightened in place.
FUNCTIONAL DESCRIPTION
CONTROLS AND COMPONENTS:
1. ON/OFF Switch
2. Tool Body
3. Protective Guard
4. Grinding Wheel
5. Lock-on Switch Feature
for Continuous Use
6. Spindle Lock Button
7. Power Cord
COMPONENT MODEL NUMBER
Pin Spanner 690157
ASSEMBLY
Make sure you have full control of the tool when grinding
into a corner as a sharp, sudden movement may occur when the wheel
contacts a secondary surface.
9 10
ACCESSORIES:
8. Side Handle
9. Pin Spanner
4
9
5
8
3
7
1
2
6