Filter
Top Products
English
15
4. Using the burr-cleaning brush,
clean the burr mounted on the
burr-shaft assembly and the
burr mounted within the
motor housing.
NOTE: Never wash the burrs or
burr-shaft assembly in water. Keep
them dry at all times.
5. After cleaning, tilt the burr grinder
backward so the front of the
motor housing faces upward.
6. With the corkscrew-shaped auger
shaft facing into the motor
housing, insert the burr-shaft
assembly into the burr grinder.
Keep the burr-shaft assembly
level, so the tip of the auger shaft
will line up with the small socket
in the motor housing.
Care and Cleaning