Filter
Top Products
Introduction
Rechargeable Cordless Screwdriver
PAS 7,2 V
L Introduction
L For your safety
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools cor-
rectly. Further details can be found in the operating
instructions. In addition to the above, you must also
observe the general safety advice contained in the
accompanying booklet. Keep these instructions in a safe
place. If you pass the device on to anyone else, please
ensure that you also pass on all the documentation.
L
Intended Use
This device is intended to be used for screwing into
wood, plastic and metal. It should only be used as
described and for the stated fields of application.
Any other use or modification to this device is deemed
contrary to its intended use and harbours a consid-
erable risk of accidents. The manufacturer accepts
no liability for damage caused through improper use
of this device.
Not intended for professional use.
L
Equipment
Q
Tool holder (hexagonal / 6,35 mm)
W
Torque pre-selector
E
Switch for angular position
R
Direction of rotation switch / lock
T
Bit storage
Y
Rechargeable battery pack
U
Button for releasing the battery
I
ON / OFF switch / speed regulation
O
Fast charging device
P
Green charging control LED
{
Red charging control LED
L
Scope of Supply
1 rechargeable cordless screwdriver
with rechargeable battery pack
1 quick charging device
3 screw bits (hexagonal shaft / 6,35 mm)
1 carrying case
1 “rechargeable battery pack” ordering card
1 set of operating instructions
1 “General Safety Instructions” booklet
1 “Guarantee and Service” booklet
L
Technical Data
Rechargeable Screwdriver Parkside PAS 7,2 V:
Rated voltage: 7,2 V DC
Rated speed: n
0
0 - 500 min
-1
Tool holder: hexagonal / 6,35 mm
Torque levels: 16
Max. torque: 9 Nm
Sound pressure level: < 70 dB (A)
Noise level: 86 dB (A)
Vibration value: < 2.5 m / s
2
Rechargeable Battery Pack PAS 7,2 V - 1:
Rated voltage: 7,2 V DC
Nominal capacity: 1,3 Ah
Energy content: 9,4 Wh
Battery Fast Charging Device PAS 7,2 V - 2:
Primary:
Nominal voltage: 230 V ~ 50 Hz
Power consumption: 30 W
Secondary:
Nominal voltage: 7,2 V DC
Charging current: 2000 mA
Charging period: ca. 60 min.
Protection class: II /
6 GB/IE