31 GB/MT
Features and equipment
1
Locking knob
2
Handle with softzone grip
3
ON/OFF switch
4
Carbon brushes access cover
5
Auxiliary handle
6
Adjustable disc guard cover
7
Clamping nut
8
Mounting spindle
9
Mounting flange
10
Spindle lock button
11
Rotation speed preselector wheel (Fig. A)
12
Spanner (Fig. C)
Included items
1 Metal-cutting disc, 125 x 2.5 x 22 mm
1 Auxiliary handle
1 Disc guard cover
1 Spanner
2 Replacement carbon brushes (not illustrated)
1 Operating instructions
1 Booklet covering “Warranty and service”
Technical information
Rated output: 1200 W
Rated voltage: 230 V
~
50 Hz
Design no-load speed: n
0
3,000 - 11,000 min
-1
Spindle thread: M14
Protection class: II /
&
Noise and vibration data:
Refers to A-weighted sound level.
Sound pressure level: 92.5 dB (A)
Sound power level: 105.5 dB (A)
Weighted acceleration, typical.
Hand-arm vibration: < 2.5 m/s
2
Wear hearing protection!
INTELLIGENT POWER CONTROL
The PWS 1200 angle grinder has
INTELLIGENT POWER CONTROL.
This electronic management system monitors and
controls the various operating states of your device.
Switching on:
The IPC electronic system start-up stage ensures
that the motor starts up slowly and gently.
This largely avoids heavy transient current surges.
No-load running:
After switching on, the IPC electronic system takes
the grinder’s speed up to the preselected value
(Setting 1 … 6). After this is reached, the IPC sys-
tem speed control stage keeps the grinder operat-
ing at a constant speed.
Overload operation:
The IPC electronic system ensures that the current is
limited if the device becomes overloaded.
Safety advice
J Attention! In order to protect yourself from the
danger of electric shock, injury or fire when
using electrical power tools, please observe the
following safety precautions. Read and take
note of these instructions and advice before
you use the device. Failure to observe the in-
structions and advice given below may result in
electric shock, fire and/or serious injury.
Introduction / Safety advice
PWS 1200 KH3116
Date of manufacture: 02-2008
230 V~50 Hz · 1200 W
n
0
3000 - 11000 min
-1
Kompernaß GmbH · D- 44867 Bochum · Germany
www.kompernass.com
intelligent
power control