37 GB/MT
Use of accessories
Cutting / roughing discs
You can use the following cutting or roughing/
grinding discs with this device:
Dimensions: ø 125 x 22,2 mm
to max. 6 mm thick
(depressed centre)
Speed: 12,000 rpm
Circumferential speed: 80 m / sec
ø 1 25 x 22,2 mm
max. 6 mm Dicke
(gekröpft)
12000 U/min
80 m/sec
Flap discs for metal
Dimensions: ø 125 mm
Speed: min. 12,000 rpm
Other accessories
You can also use abrasive consumables and tools
complying with the following technical specification:
Spindle thread: M14
Speed: min. 12,000 rpm
Backing plate for grinding discs
Dimensions: ø 115 mm / 125 mm
Grinding discs for wood / masonry attached
with hook and eye fixings
Dimensions: ø 115 mm / 125 mm
Note! These may only be used in combination
with a backing plate!
Cup brush, crimped wire
Dimensions: ø 75 - 100 mm
Use of accessories