Filter
Top Products
Page 7
Step 9 – Test Signaling
1. Your display should appear as shown in the picture below. If
not, please contact your dealer or Lathem Time directly.
2. Enter a security code using the day of week keys (remember
the days that you selected).
3. Press Run to return to the normal display showing current
time of day.
4. Press the Manual Bells button and confirm that the bells or
horns are sounding properly. If not, please contact your
dealer or Lathem Time directly.
5. Set the time and date, and program the unit as described in
the following pages.
SECURITY CODE
SECURITY CODE
/
SECURITY CODE
/