Filter
Top Products
10
Appendix
Leica DISTO™ D2 762202b gb
D
GB
F
I
E
P
NL
CN
* Use a target plate to increase the measurement range
during daylight or if the target has poor reflection properties!
** in favourable conditions (good target surface properties,
room temperature) up to 10 m. In unfavourable conditions,
such as intense sunshine, poorly reflecting target surface or
high temperature variations, the deviation over distances
above 10 m can increase by ± 0.15 mm/m.
Electromagnetic Compatibility
(EMC)
The term "electromagnetic compatibility" is taken to
mean the capability of the product to function
smoothly in an environment where electromagnetic
radiation and electrostatic discharges are present,
and without causing electromagnetic interference to
other equipment.
ƽ
WARNING
The Leica DISTO™ conforms to the most strin-
gent requirements of the relevant standards and
regulations.
Yet. the possibility of the product causing interfer-
ence in other equipment cannot be fully excluded.
Laser classification
The Leica DISTO™ produces a visible laser beam
which emerges from the front of the instrument.
See drawing {K}.
The product is a Class 2 Laser Product in accordance
with:
• IEC60825-1 : 2007 "Radiation safety of laser
products"
Class 2 Laser Products:
Do not stare into the beam or direct it unnecessarily
at other persons. Eye protection is normally afforded
by aversion responses including the blink reflex.
ƽ
WARNING
Looking directly into the laser beam with
optical aids (e.g. binoculars, telescopes) can be
hazardous.
Precautions:
Do not look directly into the beam with optical aids.
ƽ
CAUTION:
Looking into the laser beam may be hazardous
to the eyes.
Precautions:
Do not stare into beam. Do not look into the laser
beam. Make sure the laser is aimed above or below
eye level (particularly with fixed installations, in
machines, etc.).
Temperature range:
Storage
Operation
-25°C to +70°C
0°C to +40°C