Filter
Top Products
OPERATING INSTRUCTIONS
MODEL BCR10
AUTOMATIC DISCHARGE TO RECHARGE OF BATTERY
1. If you wish to automatically discharge and recharge a battery, engage
the battery onto the OmniSource base unit. (Refer to Battery
Placement and Compatibility List to determine which side your battery
fits on.)
2. Plug either the AC (110V) or DC (Cigarette Plug) into "input" jack. The
Red LED light will illuminate to indicate power is on.
3. Push the Discharge button. The Yellow LED light will illuminate to
indicate the battery is being reconditioned. Memory, if any is being
eliminated. Important: Do not discharge NoMEM™ or Lead Acid
Batteries.
4. When the battery is fully discharged, the Yellow LED light will go out
and the Green LED will illuminate, indicating battery is now being
charged.
5. When the Green LED light goes out, it indicates battery is fully
charged. It is recommended to remove battery from unit.
6. Battery is now ready to be used.
NOTE: Unit will buzz if discharge button is pushed and battery is not
properly connected.
CHARGE ONLY FEATURE FOR NoMEM AND LEAD ACID BATTERIES
1. Plug either the AC (110V) or DC (Cigarette Plug) into "input" jack. The
Red LED light will illuminate to indicate power is on.
2. Engage the battery onto the OmniSource base unit. (Refer to Battery
Placement and Compatibility List to determine which side your battery
fits on.)
3. The Green LED light will illuminate, indicating battery is now being
charged.
4. When Green LED light goes out, it indicates battery is fully charged.
Remove battery from unit.
5
5
.
.
B
B
a
a
t
t
t
t
e
e
r
r
y
y
i
i
s
s
n
n
o
o
w
w
r
r
e
e
a
a
d
d
y
y
t
t
o
o
b
b
e
e
u
u
s
s
e
e
d
d
.
.
DISCHARGE ONLY FEATURE - FOR NiCd BATTERIES ONLY
To discharge a battery without automatically charging, does not require a
power source.
1. Engage the battery onto the OmniSource base unit. (Refer to Battery
Placement and Compatibility List to determine which side your battery
fits on.)
2. Push the discharge button. The Yellow LED light will illuminate to
indicate battery is being reconditioned. Memory, if any is being
eliminated.
3. When the battery is fully discharged, the Yellow LED light will go out.
4. Remove the battery from the unit.
NOTE: Unit will buzz if discharge button is pushed and battery is not
properly connected.
BATTERY PLACEMENT AND BATTERY COMPATIBILITY LIST
Slot "A" ON TOP
Manufacturer Battery Model #
Canon:
BP-101A, BP-100, BP30/A, BP-31, BP-32, BT-30A
Curtis
Mathes:
EA13P60, VSBS0016
GE:
1CVA125, 1CVA155, 1CVA156
Lenmar:
PAN88, PBA50, LBA6500
Magnavox:
AR8378BK01, V80039BK01, V80086BK01,
V80096BK01
Panasonic:
LCS2012, LCS2312, PV-BP50, PV-BP88, VW-VB30,
VW-VB31, VW-VBM7E
Quasar:
VE-257, VE-258, VE-55A
Sears:
5399, 53991
Sylvania:
AR8378BK01, AR8395BK01, V80039BK01,
V80086BK01, V80096BK01
Zenith:
VAC-904, VAC-907
NOTE: May fit additional makes and models of equivalent 12V batteries.
For placement onto unit, slide the battery in the angled slot with contacts
side going in first, facing down.