Lenmar Enterprises BCR10 Battery Charger User Manual


 
SPECIFICATIONS
Charge Condition:
Power Source:
AC or DC Option
Temperature:
0
o
C 40
o
C
Charge Current:
0.8A MAX
Charge Voltage:
11.0V 15.0V
Trickle Current:
50mA
Charge Time:
Depending on the voltage and mAh of the battery.
Approximately 2 hours for a 2000mAh battery.
Discharge Condition:
Discharge Current:
500mA + 20mA
Cut Off Voltage:
12V : 9.5V + 0.1V
9.6V: 7.7V + 0.1V
Discharge Time:
Depending on voltage and mAh of the battery.
Approximately 2 1/2 hours for a 2000mAh battery.
Operation:
Choose proper adapter (included) for power source to be used.
For AC Operation:
Plug AC adapter into unit and the other end into
any standard household 110V outlet.
For DC Operation:
Plug DC charging cord into unit and the other end
into any 12V power sources that offer a cigarette
lighter plug receptacle.
WARRANTY
"LIMITED" 1 YEAR WARRANTY
This limited warranty starts from the date of original purchase and
expires 1 year thereafter.
If, during this period, any part, because of manufacturing defects or
workmanship fails to function properly under normal use will be
repaired at no charge for parts and labor or, at our option, the product
will be replaced. The following is excluded: damages from delay or
loss of use of equipment, or damaged batteries, malfunctions
resulting from misuse, tampering, unauthorized repairs,
modifications, or accident.
Package the unit and its accessories carefully using ample padding
material to prevent damage in transit and ship it prepaid and insured
to:
LENMAR ENTERPRISES INC. USA , 31328 VIA COLINAS #102,
WESTLAKE VILLAGE, CA 91362.
When sending in product for service, your package should include
evidence of date and place of purchase. Enclose $10.00 for shipping
and handling for addresses in the U.S. and $15.00 in Canada. For
outside the U.S. and Canada, freight will vary depending upon ship to
address.