Lincoln Electric 10061 Welding System User Manual


 
B-4
OPERATION
B-4
CLASSIC III AND IIID
IMPORTANT: 1/2” clearance between the FLEXIBLE
HOSE and the fuel tank edge is required. Also 2”
clearance between FLEXIBLE HOSE and roof.
4. Reconnect negative battery cable.
A. FLEXIBLE HOSE
B. HEAT COLLECTOR SHIELD
C. AIR FILTER
NOTE: On welders received directly from the factory,
the “Deicing” kit is configured for “summer Seasons”
FIGURE 2
C
B
A