Lincoln Electric 11458 Welder User Manual


 
B-1
OPERATION
RANGER® 305D (CE)
B-1
SAFETY PRECAUTIONS
Do not attempt to use this equipment until you
have thoroughly read the engine manufacturerʼs
manual supplied with your welder. It includes
important safety precautions, detailed engine
starting, operating and maintenance instructions,
and parts lists.
------------------------------------------------------------------------
ELECTRIC SHOCK can kill.
Do not touch electrically live parts or
electrode with skin or wet clothing.
• Insulate yourself from work and
ground.
• Always wear dry insulating gloves.
• Always operate the welder with the hinged door
closed and the side panels in place.
• Read carefully the Safety Precautions page
before operating this machine. Always follow
these and any other safety procedures included
in this manual and in the Engine Instruction
Manual.
GENERAL DESCRIPTION
The RANGER® 305D (CE) is a diesel engine pow-
ered DC multi-process welding power source and AC
power generator. The engine drives a generator that
supplies three phase power for the DC welding circuit
and three phase and single phase power for the AC
auxiliary outlets. The DC welding control system uses
state of the art Chopper Technology (CT
TM
) for supe-
rior welding performance.
FOR AUXILIARY POWER:
Start the engine and set the IDLER control switch to
the desired operating mode. Full power is available
regardless of the welding control settings providing no
welding current is being drawn.
ENGINE OPERATION
Before Starting the Engine:
• Be sure the machine is on a level surface.
• Open top & side engine doors and remove the
engine oil dipstick and wipe it with a clean cloth.
Reinsert the dipstick and check the level on the dip-
stick.
• Add oil (if necessary) to bring the level up to the full
mark. Do not overfill. Close engine door.
• Check radiator for proper coolant level. (Fill if nec-
essary).
• See Engine Ownerʼs Manual for specific oil and
coolant recommendations.
ADD FUEL
• Stop engine while fueling.
• Do not smoke when fueling.
• Keep sparks and flame away
from tank.
• Do not leave unattended while
fueling.
• Wipe up spilled fuel and allow
fumes to clear before starting
engine.
• Do not overfill tank, fuel expan-
sion may cause overflow.
DIESEL FUEL ONLY
------------------------------------------------------------------------
• Remove the fuel tank cap.
• Fill the tank approximately 4 inches (100mm) from
the top of the filler neck to allow for fuel expansion
(observe the fuel gauge while filling). DO NOT FILL
THE TANK TO THE POINT OF OVERFLOW.
• Replace the fuel cap and tighten securely.
• See Engine Ownerʼs Manual for specific fuel recom-
mendations.
BREAK-IN PERIOD
Any engine will use a small amount of oil during its
“break-in” period. For the diesel engine on the
RANGER® 305D (CE), break-in is about 50 running
hours.
Check the oil every four hours during break-in.
Change the oil after the first 50 hours of operation,
every 100 hours thereafter. Change the oil filter at the
second oil change.
During break-in, subject the RANGER® 305D (CE)
to moderate loads. Avoid long periods running at
idle. Before stopping the engine, remove all loads
and allow the engine to cool several minutes.
------------------------------------------------------------------------
WARNING
WARNING
CAUTION
DIESEL FUEL
can cause fire.