Filter
Top Products
C-2
ACCESSORIES
C-2
RANGER® 225 GXT
RECOMMENDED EQUIPMENT
STICK
K704 Accessory Kit- (400 AMP Capacity) which
includes:
• Electrode Holder & Cable
• Work Clamp & Cable
• Headshield
K875 Accessory Kit- (150 AMP Capacity)
WIRE FEED
K449 LN-25 - Includes internal contactor for across
the arc operation (no control cable). Provides “cold”
electrode until gun trigger is pressed. Includes gas
solenoid.
K1870-1 LN-15 Across the Arc Model
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
K126-2 Magnum 350 Innershield Gun
K1802-1 Magnum 300 MIG Gun (for LN-25)
K470-2 Magnum 300 MIG Gun (for LN-15)
K1500-1 Gun Receiver Bushing (for LN-15 & K126-2)
TIG
Magnum™ TIG Torch
K1783-4 - TIG Torch
KP509-Magnum Parts Kit and Argon Gas
K930-2 TIG Module - Provides high frequency and shield-
ing gas control.for AC and DC GTAW (TIG) welding applica-
tions. Its compact case is designed foe easy carrying, com-
plete with a handle. High frequency bypass is built in
Requires K938-1 Contactor Kit, K936-4 Control Cable, and
K814 Arc Start Switch.
K938-1 Contactor Kit - For use with TIG Module, Provides a
“cold” electrode until the triggering device (Arc Start Switch)
is pressed.
K936-4 Control Cable - Connects TIG Module to RANGER®
225 GXT.
Optional TIG Equipment:
K939-1 Docking Kit - For Mounting the K930-2 TIG Module
on top of the RANGER® 225 GXT.
K937-45 Control Cable Extension - Allows TIG Module to be
operated at distances up to 200ft. from the power source.
Available in 45ft. (13.7m).
K814 Arc Start Switch
Plasma
K1580-1 Pro-Cut 55
(Requires Full KVA Adapter K1816-1)