Filter
Top Products
F-2
DIAGRAMS
F-2
RANGER® 225 GXT
M20266
C
RANGER 225 GXT, RANGER 10,000, RANGER 3 PHASE, WELDMARK 225, ZR8
LN-25 OR LN-15 ACROSS THE ARC CONNECTION DIAGRAM
TO WORK
ELECTRODE
TO WORK
TO WORK
ELECTRODE CABLE
WORK CLIP LEAD
N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION.
N.B. USE POLARITY SWITCH TO SET FOR DESIRED ELECTRODE POLARITY. POSITION THE OUTPUT SELECTOR
SWITCH TO THE WIRE FEED (CV) POSITION.
ELECTRIC SHOCK can kill
Do not operate with panels open.
Disconnect NEGATIVE (-) Battery lead
before servicing.
Do not touch electrically live parts.
WARNING
MOVING PARTS can injure
Keep guards in place.
Keep away from moving parts.
Only qualified personnel should install,use
or service this equipment.
LN-25 OR LN-15
WIRE FEEDER
ENGINE
WELDER