Filter
Top Products
CV-655
www.lincolnelectric.com
[3]
Remote Output Control
Consists of a control box with
choice of two cable lengths.
Permits remote adjustment of
output. 6 pin connection.
Order K857
for 25 ft. (7.6m).
Order K857-1
for 100 ft. (30m).
Remote Control Adapter
Y connection adapter for connect-
ing K857 Remote Output Control
(6 pin plug connection) and wire
feeder input cable (14 pin plug
connection) to power source 14
pin receptacle.
Order K864
Undercarriage
Platform undercarriage with
mountings for two gas cylinders
at rear of welder.
Order K842
GENERAL OPTIONS
Digital Meter Kit
Displays amps and volts.
Order K1482-1
Air Filter Kit
Mounts on the front of the
machine and uses cleanable, all
metal air filters. Not compatible
with dual process switch.
Order K1486-1
Dual Process Switch
Mounts on front of machine and
provides polarity change or elec-
trical isolation. Great for arc goug-
ing applications and where two
separate feeders require different
output polarity or inductance
settings. Not compatible with air
filter.
Order K1528-1
A CLOSER LOOK
CV-655 / DH-10 Wire Feeder
For maximum welding flexibility – select the DH-10 dual feeder.
Weld with two different types and sizes of wire – with two different
welding procedures.
• CV-655 Power Source K1480-1
• DH-10 wire feeder K1499-1
• Control Cable – 10 ft. K1501-10
• .045 Drive Roll KP1505-045S
(2)
• Magnum 400 Gun & Cable Assembly K471-21
(1)(2)
• 600 Amp Weld Power Cable – 10 ft. K1842-10
(2)
• Work Clamp K910-2
• Harris Flowmeter Regulator and Gas Hose K586-1
CV-655 / Cobramatic® Wire Feeder
For aluminum welding, select the industries best aluminum feeding
system – Cobramatic.
• CV-655 Power Source K1480-1
• Cobramatic® Wire Feeder K2259-1
• .035 Grooved Drive Roll (optional) KP1594-035
• Python® Gun & Cable Assembly K2211-2
• 600 Amp Weld Power Cable – 10 ft. K1842-10
(2)
• Work Clamp K910-2
• Harris Flowmeter Regulator and Gas Hose K586-1
(1)
Fully assembled, no gun connector required.
(2)
Two required.
RECOMMENDED OPTIONS