Lincoln Electric IM10028-B Welding System User Manual


  Open as PDF
of 36
 
,!' $#)'$!(  *#)$# #
$%')$#
##(,)
The engine switch is used to Start the Engine, Select
High Idle or Auto Idle while the engine is running, and
stop the Engine.
When placed in the “OFF” position, the ignition
circuit is de-energized to shut down the engine.
When held in the “START” position, the engine
starter motor is energized.
When in “HIGH IDLE” ( ) position, the engine will
run continuously at high idle.
When in “AUTO IDLE” ( / ) position, the
engine will run continuously and the idler operates as
follows:
P,5<49>7
When the electrode touches the work, the weld-
ing Arc is initiated and the engine accelerates to
full Speed.
After welding ceases (and no auxiliary power is
being drawn), the engine will return to low idle
after approximately 10 to 14 seconds.
PEH9<91BI%?G5B
With the engine running at low idle and auxiliary
power for lights or tools are drawn (approximate-
ly 100-150 watts or greater) from the recepta-
cles, the engine will accelerate to high speed.  If
no power is being drawn from the receptacles
(and not welding) for 10-14 seconds, the idler
reduces the engine speed to low idle.

$%')$#
!Q%!*(

().%'*)$#(
?>?D1DD5=@DD?EC5D89C5AE9@=5>DE>D9<I?E
81F5D8?B?E78<IB514D855>79>5=1>E613DEB5BXC
=1>E1<CE@@<954G9D8I?EBG5<45BD9>3<E45C
9=@?BD1>DC165DI@B531ED9?>C45D19<545>79>5
CD1BD9>7?@5B1D9>71>4=19>D5>1>359>CDBE3D9?>C
1>4@1BDC<9CDC

!)'($ 31>;9<<
P?>?DD?E385<53DB931<<I<9F5@1BDC?B
5<53DB?45G9D8C;9>?BG5D3<?D89>7
P>CE<1D5 I?EBC5<6 6B?= G?B;1>4
7B?E>4
P<G1ICG51B4BI9>CE<1D9>77<?F5C
P<G1IC?@5B1D5D85G5<45BG9D8D8589>7544??B
3<?C541>4D85C945@1>5<C9>@<135
P'51431B56E<<ID85(165DI%B531ED9?>C@175
256?B5?@5B1D9>7D89C=1389>5<G1IC6?<<?G
D85C51>41>I?D85BC165DI@B?354EB5C9>3<E454
9>D89C=1>E1<1>49>D85>79>5>CDBE3D9?>
"1>E1<
------------------------------------------------------------------------
#'!W('%)$#
The EAGLE™ 10,000 Plus is a twin-cylinder, gasoline
driven, multiprocess arc welder and AC power gener-
ator. It is built in a heavy gauge steel case for durabili-
ty on the job site.
Codes  and above meet EPA evaporative emis-
sion requirements.
 previous next