Filter
Top Products
Contact Jaw Assembly - One Rectangular and One
Tapered Jaw - For 1/8 thru 7/32 Wire, Includes: K226-R 1
Contact Jaw Assembly - Two Tapered Jaws - For
3/32 and 1/8 Wire, Includes: K226-T 1
1 Socket Head Screw T9447-10 4
2 Washer S9262-23 4
3 Insulating Washer S10773-12 8
4 Insulating Bushing T8390 4
5 Cover Plate T8404 1
6 Lead Block S7273 1
7 Hex Jam Nut 3/8-16 4
8 Adapter Plate, Rectangular* M12478* 1
9 Insulation Plate T8391 1
10 Bottom Wire Guide M6656 1
11 Spring Insulation T8724 2
12 Hex Head Cap Screw 1/4-20 x 1.00 2
13 Insulating Bushing T8725 2
14 Hex Head Cap Screw 3/8-16 x 1.00 2
15 Hex Head Cap Screw 1/2-13 x 1.75 2
15N Hex Jam Nut 1/2-13 2
16 Lock Washer E106A-2 2
17 Plain Washer S9262-23 2
18 Spring S7664 1
19 Hex Head Cap Screw 3/8-16 x 1.25 2
20 Plain Washer S9262-4 2 or 3
21 Contact Block - Rectangular S16640-1 1
21 Contact Block - Tapered S16640-2 1
22 Hex Head Cap Screw (K226-R Only) 3/8-16 x .75 1
23 Hex Head Cap Screw (K226-R) 3/8-16 x 1.50 1
23 Hex Head Cap Screw (K226-T) 3/8-16 x 1.25 1
24 Braided Lead (K226-R Only) S7266 1
25 Contact Jaw S16640-2 1
26 Flux Tube Clip T10683 1
27 Hex Head Cap Screw 3/8-16 x 1.50 1
28 Hex Head Screw 5/16-18 x .75 2
29 Flux Hose T10642-2 1
30 Flux Hose Tip S7748-35 1
* Item 8 for K32 Jaws Sold with LAF and LT3
Tractors was round – Part S7258.
02-04-2002
ITEM DESCRIPTION PART NO. QTY.
123456789
P-101-N.1P-101-N.1
# Indicates a Change This Printing
Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration