Filter
Top Products
1 Head Lift Housing K29 1 X •
1 Head Lift Housing L5881 1 • X
2 Head Lift Tube M8228 1 X •
2 Head Lift Tube M8228-1 1 • X
3 Head Lift Lock Pin S16067 1 • X
3 Locating Key T12121 1 X •
4 Socket Head Cap Screw T9447-34 1 X •
4 Socket Head Cap Screw T9447-32 1 • X
5 Spring T10247-11 1 • X
6 Spring Retainer S11295-5 1 • X
7 Snap Ring S9776-14 1 • X
8 Head Lift Screw Assembly, Includes: S10114 1 X X
Head Lift Screw S10094 1 X X
Ball Bearing M9300-6 1 X X
Snap Ring S9776-3 1 X X
Gear S10096-1 1 X X
Woodruff Key #404 1 X X
9 Boot S10442 1 X X
10 Clamp S10888-11 1 X X
11 Clamp S10888-8 1 X X
12 Adjusting Shaft Assembly, Includes: S10097 1 X X
Crank Arm Assembly T10543 1 X X
Snap Ring S9776-3 1 X X
Thrust Washer S9262-38 1 X X
Drive Pin T8433 1 X X
Shaft T10544 1 X X
Bearing Retainer S10093 1 X X
Needle Bearing S7844 1 X X
Oil Seal S7611-13 1 X X
13 Round Head Screw #10-24 x .50 2 X X
14 Lock Washer E106A-1 2 X X
15 Oil Cup T10643 1 X X
16 Needle Bearing S10116-1 1 X X
17 Thrust Washer S9262-37 1 X X
18 Cover Plate T14606 1 X X
19 Lock Washer E106A-1 2 X X
20 Round Head Screw #10-24 x .50 2 X X
21 Expansion Plug T10542-1 1 X X
22 Shim T10601
As Reqʼd
X•
23 Locking Plate T12120 1 X •
24 Socket Head Cap Screw T9447-33 2 X •
25 Lock Washer E106A-2 2 X •
02-04-2002
In mid 1978 the K29 was redesigned. Old design assemblies may be identified by three socket head
screws in the head lift lock area. New design assemblies have only one socket head screw. Use
parts marked “X” in Column 1 for old design. Use parts marked “X” in Column 2 for new design.
ITEM DESCRIPTION PART NO. QTY.
123456789
P-101-S.1P-101-S.1
# Indicates a Change This Printing
Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration