Filter
Top Products
A-1
INSTALLATION
COMMANDER 300
A-1
TECHNICAL SPECIFICATIONS - Commander 300 (K1585-1 & -2)
Make/Model Description Speed (RPM) Displacement Starting Capacities
System
Deutz 3 cylinder High Idle 1900 125 cu. in 12VDC battery Fuel: 25 gal.
F3L 1011F 31 HP(23 kw) Low Idle 1400 (2.05 L) & Starter 94.6 L
Diesel Engine @ 1800 RPM Full Load 1800
Bore x Stroke Oil: 6.3 Qts.
6.0 L
3.89” x 4.13”
(99mm x 105mm)
INPUT - DIESEL ENGINE
RATED OUTPUT - WELDER
HEIGHT
2
WIDTH DEPTH WEIGHT
42.0 in. 31.5 in. 63.1 in. 1325 lbs.(601 kg)
1066.8 mm 800.1 mm 1602.7 mm
OUTPUT - WELDER AND GENERATOR
Duty Cycle Welding Output Volts at Rated Amps
100%
300 amps (DC multi-purpose) 32 volts
60%
375 amps (DC multi-purpose) 34 volts
Welding Range Open Circuit Voltage Auxiliary Power
1
30 - 300 Amps 87 Max OCV 120/240 VAC
10,000 Watts, 60 Hz.
5 Ranges @1900 RPM 100% Duty Cycle
PHYSICAL DIMENSIONS
1. Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2. Top of Enclosure. Add 8.9” (226.1mm) for exhaust.