Lincoln Electric IM612 Welder User Manual


 
RANGER 8+ DIESEL
A-4
INSTALLATION
A-4
FUEL
Fill the fuel tank with clean No. 2, diesel fuel only. Do
not fill to the top of the filler neck to allow room for
expansion.
The RANGER 8+ DIESEL has a 9 gallon (34 liter) fuel
tank with a top fill and fuel gauge mounted on the fuel
tank. See the OPERATION and MAINTENANCE sec-
tions of this manual for more details about fuel.
BATTERY CONNECTIONS
GASES FROM BATTERY can explode.
Keep sparks, flame and cigarettes
away from battery.
To prevent EXPLOSION when:
INSTALLING A NEW BATTERY — disconnect
negative cable from old battery first and connect
to new battery last.
CONNECTING A BATTERY CHARGER —
remove battery from welder by disconnecting nega-
tive cable first, then positive cable and battery
clamp. When reinstalling, connect
negative cable last. Keep well ventilated.
USING A BOOSTER — connect positive lead to
battery first then connect negative lead to negative
battery lead at engine foot.
BATTERY ACID can burn eyes and
skin.
Wear gloves and eye protection and
be careful when working near battery.
Follow instructions printed on battery.
------------------------------------------------------------------------
WARNING
IMPORTANT: To prevent ELECTRICAL DAMAGE
WHEN:
a) Installing new batteries.
b) Using a booster.
Use correct polarity — Negative Ground.
The RANGER 8+ DIESEL is shipped with the negative
battery cable disconnected. Before you operate the
machine, attach the disconnected cable securely to
the negative (-) battery terminal.
NOTE: This machine is furnished with a wet charged
battery; if unused for several months, the battery may
require a booster charge. Be sure to use the correct
polarity when charging the battery.
SPARK ARRESTER
Diesel engine mufflers may emit sparks when the
engine is running. Some federal, state, or local laws
require spark arresters in locations where unarrested
sparks could present a fire hazard.
The standard muffler on the RANGER 8+ DIESEL
does not act as a spark arrester. When local laws
require it, a spark arrester must be installed on the
machine and properly maintained.
An incorrect spark arrester may lead to damage to the
engine or reduce performance.
------------------------------------------------------------------------
CAUTION