Filter
Top Products
C-1
ACCESSORIES
C-1
GENERAL OPTIONS /
ACCESSORIES
The following options/accessories are available for
your RANGER 8+ DIESEL from your local Lincoln
Distributor.
K957-1 Two-Wheel Trailer - For in-plant and yard
towing. Suitable for road towing with optional fender
and light kit. Load capacity is 1150 lbs.
K933-1 Four-Wheel Undercarriage - Allows move-
ment of the RANGER 8+ DIESEL by hand without lift-
ing. Easily assemblies to the RANGER 8+ DIESEL.
Includes two rugged, hard molded wheels and two
durable, two ply nylon 4.80/4.00-8 pneumatic tires
rated at 30 psi. The spring loaded handle provides
convient, comfortable steering. The undercarriage
comes equipped with a sturdy frame that is capable of
supporting the weight of the machine.
K802-R Power Plug Kit - Provides four 115V plugs
rated at 15 amps each and one dual voltage, full kVA
plug rated at 115/230V, 50 amps.
K710 Accessory Kit - Includes 30 ft (9.1m) 3 AWG
electrode cable, 25 ft. (7.6m) 3 AWG work cable,
headshield with No. 12 filter, GC300 work clamp and
Cooltong® 300 electrode holder. Cables are rated at
225 amps, 40% duty cycle.
K892-1 Remote Control Receptacle Kit - Includes a
6-pin MS-type (Amphenol) receptacle and a local-
remote toggle switch that mounts in the case front.
Requires a Remote Control Option.
K857-1 Remote Control - Consists of a control box
with 100 ft. (30.5 m) of four conductor cable. Permits
remote adjustment of output voltage. (Requires
Remote Control Receptacle Kit to be mounted in
machine.)
TIG WELDING OPTIONS /
ACCESSORIES
K930-2 TIG Module - Provides high frequency and
shielding gas control for AC and DC GTAW (TIG)
welding applications. Its compact case is designed for
easy carrying, complete with a handle. High frequen-
cy bypass is built in. The K938-1 Contactor Kit must
be field installed in the TIG Module when used with a
RANGER 8+ DIESEL. Additionally, the K936-3 con-
trol cable is required if remote control is used. If
remote control is not used the K936-4 control cable is
required.
The TIG Module is supplied without accessories, Arc
Start switches, Amptrols, cables, torches and mount-
ing brackets must be purchased separately.
K892-1 Remote Control Receptacle Kit - Required
when using a K930-2 TIG Module with an optional
amptrol.
K939-1 Docking Kit - For mounting the K930-2 TIG
Module on top of the RANGER 8+ DIESEL.
K936-3 Remote Control Cable - Control cable for
connecting the K930-2 TIG Module to a RANGER 8+
DIESEL equipped with a K892-1 Remote Kit. 9-
Socket to a grounded 115 V plug and a 6 pin MS-con-
nector. (Contains circuits 2, 4, 31, 32, 75, 76, 77 and
ground)
K936-4 Remote Control Cable - Control cable for
connecting the K930-2 TIG Module to a RANGER 8+
DIESEL not equipped with a K892-1 Remote Kit. 9-
Socket to a grounded 115 V plug and a 6 pin MS-con-
nector. (Contains circuits 31, 32, and ground)
K814 Arc Start Switch - A remote start switch used
in conjunction with the K930-2 TIG Module to energize
the RANGER 8+ DIESEL output terminals via the TIG
module.
K963 Hand Amptrol - Remote output control on
RANGER 8+ DIESEL.
K870 Foot Amptrol - Remote output control on
RANGER 8+ DIESEL.
RANGER 8+ DIESEL