Filter
Top Products
ASSEMBLY
Dust
bag
Install the dust bag on the nozzle
of
the
tool.
When installing it, push the bag's entry port
toward the nozzle as far as
it
will go to prevent it from coming off during operation.
For
the best results, empty the dust bag when it becomes about half full. Remove the
dust bag from the tool and pull out the fastener.
NOTE:
If
you connect
a
Makita vacuum cleaner Model
406
to this tool, more efficient and cleaner
operations can be performed.
Removing
or
installing planer blades
CAUTION:
*Always be sure that the tool is switched
off
and the battety cartridge is removed before
*Handle the blades very carefully. Use gloves or rags to protect your fingers or hands
To
remove the blades, first loosen the two installation bolts one turn counterclockwise
with the hex wrench provide.
Push the blade from the belt side with the hex wrench.
Remove the other blade in the same manner.
removing or installing the blades.
when removing
or
installing the blades.
14