Filter
Top Products
Tool
Use and Care
12.
Use clamps or other practical way to secure and support the workpiece to
a stable platform. Holding the work by hand or against your body is unstable
and may lead to
loss
of control.
13.
Do
not force tool. Use the correct tool for your application. The correct tool
will
do the job better and safer at the rate for which
it
is
designed.
14.
Do
not use tool
if
switch does not turn
it
on or
off.
A toot. that cannot be
controlled
with
the switch
is
dangerous and must be repaired.
15. Disconnect battery pack from tool or place the switch
in
the locked or off
position before making any adjustments, changing accessories, or storing
the tool. Such preventive safety measures reduce the risk of starting the tool
accidentally.
16. Store idle tools out of reach of children and other untrained persons. Tools
are dangerous
in
the hands
of
untrained users.
17. When battery pack is not
in
use, keep
it
away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to another. Shorting the battery
terminals together may cause sparks, burns, or a fire.
18.
Maintain tools
with
care. Keep cutting tools sharp and clean. Properly
maintained tools
with
sharp cutting edge are
less
likely to bind and are easier
to control.
19.
Check for misalignment or
binding
of moving parts, breakage
of
parts, and
any other condition that may affect the tool's operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly
maintained tools.
20.
Use only accessories that are recommended
by
the manufacturer for your
model. Accessories that may be suitable for one tool may create a risk of injury
when used on another tool.
Service
21.
Tool
service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel may result
in
a risk of injury.
22.
When
servicing a tool, use only identical replacement parts. Follow
instructions
in
the Maintenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance Instructions may create a risk of shock
or injury.
4