Filter
Top Products
After hooking the lever for drum locking onto the stopper, secure the hex bolts hold-
ing down the blade holder:
a
total
of
8
on the planer arid jointer sides, respectively.
0
After
all
bolts have been secured, check your cutter height agian.
MAINTENANCE
0
Remove the chain guard and lubricate the
chain with machine oil.
Oil the sliding support parts, moving parts
and feed screw portions whenever
you
think
it
necessary.
CARBON
BRUSH
REPLACEMENT
0
Replace carbon brushes when they wear
down to about
6
mm
(1/4")
or sparking will
occur. Both brushes should be changed
at
!
the same time.
I_-----
L
9