Filter
Top Products
Sighting
The front
of
the base is notched to provide
two guide edges.
For straight cuts, align the edge with
0"
engraved on it with your cutting line on the
workpiece.
For
45"
bevel cuts, align the edge with
45"
engraved on it with your cutting line.
Switch action
To
prevent the trigger from being acciden-
tally pulled,
a
lock-off lever is provided.
To
start the tool, slide the lock-off lever in
the direction of the arrow and pull the trig-
ger. Release the trigger to stop.
Lock-off lever
Switch
trigger
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the
"OFF"
position when released.
Water
supply
Remove the cap on the tank and fill through
the hole. Recap the tank. Be sure that the
water cock is turned off when filling the
tank with water.
CAUTION:
When filling the tank with water, be careful not to let the tool get wet
12