Filter
Top Products
Using guide rule (Rip fence)
When cutting widths of under
150
mm
(6")
repeatedly, use of the guide rule will assure
fast, clean, straight cuts.
~
I
To
attach the guide rule (rip fence), secure
the rule holder to the base with the screw
(do not tighten).
Insert the guide rule between the
base
and
the rule holder. Now tighten the screw
with the hex wrench.
Using circular guide
Use of the circular guide insures clean,
smooth cutting of circles (radius; under
200
mm;
7-7/8")
and arcs.
Rule holder
Hex
wrench
Screw
Guide rule
I
Circular guide
11