Filter
Top Products
Installing universal shank jig
saw
blade
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before installing or removing
the blade.
If
the universal blade clamp
is
used, you
can use blades of other makes which have
a
universal shank like the one shown in
the figure, with
a
blade width of
6.35
mm
(1/4").
Insert the blade into the blade holder
as
far
as
it
will go. Make sure that the end of the
blade shank reaches the bottom
of
the
inner
slit
and tighten the bolt securely with
the hex wrench.
The end
of
the blade
shank should reach the
bottom
of
the inner slit
il
6