Filter
Top Products
12
Guide rail adapter set (accessory)
When cutting parallel and uniform width or cutting straight, the use of the guide
rail and the guide rail adapter will assure the production of fast and clean cuts.
To install the guide rail adapter, insert the rule bar into the square hole of the
base as far as it goes. Secure the bolt with the hex wrench securely.
Install the guide rail adapter on the rail of the guide rail. Insert the rule bar into
the square hole of the guide rail adapter. Put the base to the side of the guide
rail, and secure the bolt securely.
CAUTION:
• Always use blades No. B-8, B-13, B-16, B-17 or 58 when using the guide
rail and the guide rail adapter.
Cover plate
Use the cover plate when cutting decorative veneers, plastics, etc. It protects
sensitive or delicate surfaces from damage. Fit it on the back of the tool base.
004446
1. Bolt
2. Rule bar
1
2
004447
1. Guide rail adapter
2. Screw
3. Guide rail
1
2
3
004448
1. Cover plate
2. Base
1
2
001928