Filter
Top Products
Removing
or
installing saw blade
CAUTION
:
Always
be
sure that the tool
is
switched off and unplugged before removing or installing
the blade.
To remove the blade, press the shaft lock
so
that the blade cannot revolve and use
the wrench to loosen the hex bolt clock-
wise. Then remove the hex bolt, outer
flange and blade.
To
install the blade, follow the removal
procedure in reverse. BE SURE TO
TIGHTEN THE HEX BOLT SECURELY.
CAUTION
:
.Be sure the blade
is
installed with teeth
pointing up
at
the front of the tool.
*Use only the Makita wrenches to install
or remove the blade.
*One side
of
the inner flange
is
for
5/8"
hole diameter of the blade; the other side
is
for
13/16"
hole diameter.
inner flange
\
Fig.
9
Blade Outer flange
I
Fig.
1(
Use the correct side for the hole diameter of the blade you intend to use. Mounting the
blade on the wrong side can result in dangerous vibration.
a