Filter
Top Products
Adjusting depth
of
cut
Loosen
the
lever
on
the
depth guide and
move the base up or down. At the desired
depth of cut, secure the base
by
tightening
the lever.
Fig. 1
CAUTION
:
Use
a
shallow depth of cut when cutting thin workpiece for cleaner, safer cuts.
*After adjusting the depth of cut, always tighten the lever securely.
Bevel
cutting
Loosen
the lever on the bevel
scale
plate on
the front of the
base.
Set
for
the desired
angle
(0"
-45')
by tilting accordingly, then
tighten the lever securely.
Sighting
For straight cuts, align the
left
notch in the
front of the base with your cutting line on
the workpiece. For
45"
bevel cuts, align
the right notch with
it.
Bevel
scale plats
For straight
For
45"
cuts
bevel
cuts
Base plate
I1
I
Fig.
1
9