Filter
Top Products
Sighting
The front of the base
is
notched to provide
two guide edges.
For straight cuts, align the edge with
0'
engraved on
it
with your cutting line
on
the workpiece.
For
45'
bevel cuts, align the edge with
45'
engraved on
it
with your cutting line.
I
For
straight
cuts
\
'For
450
bevel
Cutting
line
Fig.
11
Switch action
To
prevent the trigger from being acciden-
tally pulled,
a
lock-off lever
is
provided.
To
start the tool, slide the lock-off lever
in the direction of the arrow and pull the
trigger.
Release
the trigger to stop.
Lock-off
lever
I
J
Fig.
17
CAUTION
:
Before inserting the battery cartridge into the tool, always check to
see
that the switch
trigger actuates properly and returns to the "OFF" position when released.
Operation
Hold the tool firmly. Set the base plate on
the workpiece to be cut without the blade
making any contact. Then turn the tool on
and wait until the blade attains full speed.
Now simply move the tool forward over
the workpiece surface, keeping
it
flat and
advancing smoothly until the sawing
is
completed. To
get
clean cuts, keep your
sawing line straight and your speed of
advance uniform.
I
Base
Fig.
18
CAUTION:
0
Always gently keep the tool moving straight ahead when cutting. Forcing or twisting the
tool will result in overheating of the motor and dangerous kickback, possibly causing
severe injury.
0
If the tool
is
operated continuously until the battery cartridge has discharged, allow the
tool to rest for
15
minutes before proceeding with
a
fresh battery.
13