Filter
Top Products
15.
Place the wider portion of the saw base on that part of the workpiece which
is solidly supported, not on the section that
will
fall
off
when the cut
is
made.
As examples, Fig.
5
illustrates the RIGHT way to cut
off
the end
of
a board,
and Fig.
6
the
WRONG
way.
If
the workpiece is short
or
small, clamp
it
down.
DON'T TRY TO HOLD SHORT
PLACES
BY
HAND!
\
/
~
Fig.
5
16.
Never attempt to saw
with
the
circular saw held upside down
in
a
vise. This is extremely dangerous and
can lead to serious accidents.
-
Fig.
1
Fig.
7
17. Before setting the tool down after completing a cut, be sure that the lower
(telescoping) guard has closed and the blade has come to a complete stop.
7