Filter
Top Products
7
clamp it down. DO NOT TRY TO HOLD
SHORT PIECES BY HAND!
18. Never attempt to saw with the circular saw
held upside down in a vise. This is
extremely dangerous and can lead to seri-
ous accidents.
19. WARNING: Blade coasts to stop after
switch is released. Contact with coasting
blade can cause serious injury. Before
setting the tool down after completing a
cut, be sure that the lower (telescoping)
guard has closed and the blade has come
to a complete stop.
20. Some material contains chemicals which
may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow mate-
rial supplier safety data.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
SYMBOLS USD301-1
The followings show the symbols used for tool.
V .......................volts
...................direct current
....................no load speed
.../min................revolutions or reciprocation per
minute
Fig. 5
Fig. 6
Fig. 7
n
˚