Filter
Top Products
Adjusting depth
of
cut
I
Fig.
12
Loosen the lever on the depth guide and
move the base up or down. At the desired
depth of cut, secure the base by tightening
the lever.
Fig.
11
CAUTION:
0
Use
a
shallow depth of cut when cutting thin workpiece for cleaner, safer cuts.
0
After adjusting the depth of cut, always tighten the lever securely.
Bevel
cutting
Loosen the lever on the bevel
scale
plate on
the front of the base.
Set
for the desired
angle (0'-45') by tilting accordingly, then
tighten the lever securely.
Sighting
The front of the base
is
notched to provide
two guide edges.
For straight cuts, align the edge with
0
en-
graved on
it
with your cutting line on the
work p
iece.
For 45' bevel cuts, align the edge with 45'
engraved on
it
with your cutting line.
pvel scale plate
Lever
/
/
Fig.
1
10