Filter
Top Products
15.
Place the wider portion of the saw base on that part
of
the workpiece which
is solidly supported, not on the section that will fall
off
when the cut
is
made.
As
examples, Fig.
5
illustrates the RIGHT way to cut off the end of a board,
and Fig.
6
the WRONG way. If the workpiece is short or small, clamp
it
down.
DON'T
TRY
TO HOLD SHORT PIECES
BY
HAND!
I
I
Fig.
5
16.
Never attempt to saw with the circu-
lar saw held upside down
in
a vise.
This is extremely dangerous and can
lead to serious accidents.
Fig.
1
7