Filter
Top Products
Hex wrench storage
When not in use, the
conveniently stored.
hex wrench can be
CAUTIO
N:
Always be sure that the tool
is
switched off and the battery cartridge
is
removed before
any adjustment is attempted.
Adjusting depth
of
cut
Loosen the lever on the depth guide and
move the base up or down.
At the desired depth
of
cut, secure the base
by tightening the lever.
CAUTION:
I
I
Fig.
13
.Use
a
shallow depth
of
cut when cutting thin workpiece for cleaner, safer cuts.
*After adjusting the depth of cut, always tighten the lever securely.
Bevel cutting
Loosen the screw on the bevel scale plate
on
the front of the base. Set for desired
angle
(0"
-
50")
by
tilting accordingly, then
tighten the clamp screw securely.
I
Bevel
scale
pla4
1
Screw